- VEW: Automated Wash Water Recycling Systems – VEW
- VEW-A: Automated Wash Water Recycling Systems
- Extreme V: Heavy Duty Washwater Treatment System
- Pressure Washer Tank And Pump Model PSM
- Automated Influent Feed System Model: IFS
- TB: Triple Basin Water Treatment System
- OSF: High Performance Industrial Oil Water Separators
- EnBio™: Biological Treatment System
- SuperAerator™: Aeration System
- Bio-Digester™: Modular Biological Digestion Systems
- Mud Blaster™: High Volume Water Blast Systems
- EpH: pH Adjustment Systems
- Filter Pac: Industrial Grade Effluent Filtration Systems
- MicroSTAX™: Industrial Grade Pretreatment Systems
- Washbay Solutions: Design Concepts
- Containerized Treatment Systems: Options & Designs
Download Datasheet:
The VEW automated wash water recycling systems are designed for the treatment of wastewater generated from wash racks and pressure washers used in vehicle and equipment washing facilities. VEWs can be used as a single pass and discharge system or as a recycle system depending on the project needs. The VEWs are designed to remove oils, fuels, suspended solids and other contaminants.
The VEW Automated Wash Water Recycling Systems Consists of the Following Sub-Systems:
- Oil Water Separator
- Solids filtration
- Effluent pumpout system
- Master Control Panel (MCP) automatic controls
The VEW Wash Water Recycling Systems can be used as a stand-alone treat and discharge to sewer design or when combined with the balance of the other VEW modules it becomes a full recycle/reuse system. The other modules needed for full recycle are:
- IFS Influent Feed System
- PSM Pressurized Supply Module
- EnBio™ biological treatment system
- SuperAerator™ aerating system
- Sludge Handling Filter
- Washpad & collection sump
Larger flow rated systems can be provided for any flow rate from 50 to 300 GPM. Any of the technologies in our family of products can be combined to create the right solution for your application.
Customization & modifications to fit your project needs are offered. Typical performance is 10 ppm or less, 30 micron oil droplet (performance depends on model).
Products Removed Using Our Automated Wash Water Recycling Systems:
Motor oils, fuels (vehicle/jet), fuel oils, hydraulic fluids, immiscible machining oils, lube oil, transmission fluid, bunker c, DNAPLs, LNAPLs, crude, air compressor lube & other hydrocarbon based derivatives (BTEX etc..), all filterable solids 25 micron and greater. Model sizing is based on the oil/fuel specific gravity, droplet size removal desired and other parameters of the wastestream.
Get A Quote On All Our Vehicle Wash Water Recycling Systems
Send us a message here or call 815.344.2960
